Troubleshooting; Technical Specifications - Polar CK640 Bedienungsanleitung

UK

Troubleshooting

If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
The appliance is
leaking water
The appliance is
unusually loud

Technical Specifications

Model Voltage Power
CK640 230V~ 50Hz 450W
14
CK640_ML_A5_v2_170425.indb 14
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
The appliance is not properly
levelled
The discharge outlet is blocked
Movement of water to the drain is
obstructed
The water container is damaged
The appliance has not been
installed in a level or stable
position
Loose nut/screw
Current Capacity
3A 3 x GN 2/3
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Adjust the screw feet to level the appliance
(if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if
applicable)
Call POLAR agent or qualified Technician
Check installation position and change if
necessary
Check and tighten all nuts and screws
Dimensions
Refrigerant
H x W x D
390 x 600 x 585 R290 150g
Weight
(kg)
42
2017/4/25 13:23