Troubleshooting; Technical Specifications - Polar CM287 Bedienungsanleitung

Troubleshooting

If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
The appliance turns on,
but the temperature is
too high/low
The appliance is
unusually loud
Error code EE4

Technical Specifications

Model Voltage
CM287
220-240V
50Hz
CM287_ML_A5_v4_20190730.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Too much ice on the evaporator
Condenser blocked with dust
Insufficient airflow to the fans
Appliance is located near a
heat source or air flow to the
condenser is being interrupted
Ambient temperature is too high
Unsuitable foodstuffs are being
stored in the appliance
Appliance is overloaded
The appliance is touching a
neighbouring object
The appliance has not been
installed in a level or stable
position
• Restricted Airflow
• Blocked Condenser
Temperature
Power Current
Range
1300W 6.7A 2°C ~ 10°C
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Defrost the appliance
Clean Condenser
Remove any blockages to the fans
Move the refrigerator to a more suitable
location
Increase ventilation or move appliance to a
cooler position
Remove any excessive hot foodstuffs or
blockages to the fan
Reduce the amount of food stored in the
appliance
Check installation position and change if
necessary
Check installation position and change if
necessary
• Increase airflow
• Call POLAR agent or qualified
Technician
Dimensions
Refrigerant
H x W x D mm
R290 1459 x 918 x 792
UK
Weight
130kg
5
2019/7/30 13:51