Installation; Overhead Rigging; Danger To Life - EuroLite LED Mini D-20 Bedienungsanleitung

11 12 13
14
15

INSTALLATION

Overhead rigging

Please consider the valid standards and national regulation during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.

DANGER TO LIFE!

21/30
(11) Fixation screw
(12) Mounting bracket
(13) Ventilation fan
(14) Beam LED lenses
(15) SMD Strobe LEDs
00092113.DOC, Version 1.0