Charging The Battery Pack - Kenwood TK-3601D Benutzerhandbuch

CHARGING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before use.
Average battery pack life:
Battery Saver ON
19 hours
• Average times are calculated using 5% transmit time, 5% receive
time, and 90% standby time.
1 Plug the AC adapter cable into the
jack located on the bottom of the
charger.
2 Plug the AC adapter into an AC
outlet.
3 Slide a transceiver equipped with a
battery pack into the charging slot
of the charger.
• Make sure the metal contacts of the
battery pack mate securely with the
charger metal terminals.
• The indicator lights red and charging
begins.
Battery Saver OFF
14 hours
Charger
terminals
DC plug
To AC outlet
Indicator
9