Refilling The Gear Box With Oil; Emptying The Carburetor Float Chamber - SHERCO 250 SE/R Handbuch

Engine maintenance (continued)

REFILLING THE GEAR BOX WITH OIL

2
1
n Emptying the carburetor float chamber
1
- Install the drain plug
gasket.
Drain plug
12
- Remove the engine oil filler cap
- Fill the engine with oil
Motor oil
- Install the engine guard.
ATTENTION
To protect the environment , oil , oil filters and used
material must be deposited in a collection center
and not down drain or in the wild.
- Turn handle of fuel tap to the OFF position
- Place a cloth beneath the carburetor to soak up
emerging fuel.
- Remove plug
1
- Completely drain the fuel.
- Mount and tighten the plug.
and with a new
1 2
M16 15Nm
.
2
0,8l SAE 10W40
99