Cleaning The Fork Dust Seals; Checking The Play Of The Steering Head Bearings - SHERCO 250 SE/R Handbuch

250-300 SE/R
Chassis maintenance (continued)

CLEANING THE FORK DUST SEALS

CHECKING THE PLAY OF THE STEERING HEAD BEARINGS

112
Place the motorcycle on a suitable stand.
Remove the front wheel (
Remove the fork protectors. Slide the dust cover
down. Clean and lubricate the dust cover
and the fork tube.
Lubrifiant universel Minerva F4
Reinstall the dust cover and clean off any left
over oil.
Reinstall the fork protection.
Reinstall the front wheel (
Take the bike off of the stand.
Place the motorcycle on a suitable stand.
Exert a back and forth force on the fork legs.
There should not be any play in the bearings
in any direction in the steering bearings.
If there is play and / or resistance, adjust and /
or change the bearings.
Adjust the bearing free play (
Take the bike off of the stand.
p.118)
☛
p.118)
☛
p.113)
☛