SOLIS OEKOTHERM Bedienungsanleitung Seite 66

SOLIS Bettwärmer-oeko-engl.-GROSS_2013 09.07.13 15:59 Seite 66
3 . S W I T C H I N G O N A N D S E T T I N G T E M P E R AT U R E
ON/OFF-
switch
• Turn the ON/OFF switch on the backside of the control element to „I". The ap-
pliance is now turned on and the display will light up.
ATTENTION: The electronic elements in the control
lead to a slight warming of the control during use.
The control must never lie on the bed warmer and
must never be covered by blankets, pillows or
similar items. Nor should you put anything on it,
lie down or sit on it.
• Quickly pre-warming the bed warmer by use of the FAST HEAT button:
Press the FAST HEAT button to activate Quick Warmup mode. The display will
state a red „6" and the bed warmer will warm up rapidly. The FAST HEAT
function is only intended for warming up the bed warmer. Should you intend to
lie down on the bed warmer, do not activate warmth level 6!
• Please note:
You can not set any other temperature if the FAST HEAT function is enabled and
the corresponding button is pressed.
To activate warmth levels 1 - 5, deactivate the FAST HEAT function by pressing
the FAST HEAT button again. After that, keep pressing the
desired warmth level shows up on the display.
66
Temperature
display
FAST HEAT button
Temperature
range button
button until the