SOLIS OEKOTHERM Bedienungsanleitung Seite 59

SOLIS Bettwärmer-oeko-engl.-GROSS_2013 09.07.13 15:59 Seite 59
3. Before first time of use, check that the voltage
on the fabric label matches your mains voltage.
4. Regularly check the bed warmer for potential da-
mage and signs of wear. Do not use the appliance
if the cable, control, power plug or the power
adaptor are damaged or otherwise faulty, e.g. if
the flow of heat is interrupted. Never attempt re-
pairs yourself, but take your bed warmer to SO-
LIS or a SOLIS approved service centre in order
to get it inspected or mechanically and electri-
cally repaired.
5. Do not leave the power cable hanging over
table edges so that it cannot be pulled. Make
sure it does not come into contact with hot sur-
faces such as, for example, a hot plate or radia-
tor.
6. Never carry or drag the appliance by the power ca-
ble. Never pull on the power cable or the appliance
to remove the power plug from the socket.
7. During use the control is not allowed to lie on or
under the bed warmer or be otherwise covered.
8. Never lay the bed warmer on hot surfaces or
bring the bed warmer into contact with them.
9. Do not use the appliance outdoors.
59