SOLIS OEKOTHERM Bedienungsanleitung Seite 65

SOLIS Bettwärmer-oeko-engl.-GROSS_2013 09.07.13 15:59 Seite 65
▲
F I R S T U S E
• With this convenient bed warmer you can warm up your bed before going to
sleep and even keep it warm over night. Your bed warmer is fitted with a tem-
perature controller with 5 levels to allow you exactly setting a pleasant tempe-
rature. Additionally, a Quick Warmup function to pre-warm your bed is provided.
1 . P R E PA R I N G T H E A P P L I A N C E
• Unfold the bed warmer and place it directly on your mattress. The connection
jack should be on the side facing the mattress.
• Smoothen out the bed warmer.
• Place a bed sheet over the bed warmer. You can then put your blanket and pil-
low on the bed as you would usually.
ATTENTION: Always place the bed warmer be-
tween mattress and bed sheet. Never use it as a
blanket or to tuck somebody in.
2 . C O N N E C T I N G T H E A D A P T O R T O T H E C O N N E C T I O N J A C K
• Plug the adaptor into the connection
jack on the bed warmer to connect the
control element.
• Plug the power plug into a suitable
power outlet.
• Please note: To remove the connection
adaptor, press the two protrusions on
the left and right side of the connection
jack.
ATTENTION: Only use the appliance with the in-
cluded control element and connection adaptor!
Connection jack Adaptor
Connecting
Connection jack Adaptor
Disconnecting
65