Setting The Temperature - Dometic COOLMATIC CRX65 Montage- Und Bedienungsanleitung

CRX
8.2 Switching on the refrigerator
➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
8.3

Setting the temperature

➤ Press the
button repeatedly until the desired temperature level is set. The
lower/largest LED is the coldest setting. The upper/smallest LED is the warmest
setting.To switch from the coldest level to the warmest level press the
again.
I
NOTE
The cooling performance can be affected by:
The ambient temperature
The amount of food to be conserved
The frequency with which the door is opened.
If the ambient temperature is at 16 °C to 20 °C, set the refrigerator to at
least level 2.
8.4 Setting the fast cooling function
(CRX50, CRX65, CRX80 only)
A
NOTICE!
Only use the fast-cooling function when the removable freezer
compartment is not installed. Otherwise there is a risk that the
freezer compartment becomes too cold and condensate cannot be
prevented from forming on the outside of the refrigerator. The
energy consumption will also increase dramatically.
Note that bottles and other containers can burst when frozen.
Note that it is difficult to open the refrigerator directly after closing it.
The option of operating the refrigerator using a fast-cooling function allows
temperatures suitable for freezing foods to be reached.
➤ Press the
button for longer than 3 seconds.
✓ The LED above the
➤ Press the
button again for longer than 3 seconds to operate the refrigerator in
normal mode.
EN
button lights up.
Using the refrigerator
button.
button
25