Removal Of Parts; Technical Specifications; Structure; Drive - Lopital Reflex Benutzeranleitung

7. Removal of parts
All parts that are replaced or removed can be sent back to Lopital BV . You may also offer
the parts to the engineer for destruction . We will ensure that all parts are processed in
an environmentally-friendly manner .
If you take care of disposal of the product yourself, you must take account of the fact
that batteries and chargers must be disposed of as small chemical waste .
8. Technical Specifications
The Reflex Shower-toilet chair belongs to category 'BF'.
The Reflex Shower-toilet chair is a class 2 EMC product.
The Reflex is splash-proof; this means that the Reflex can be used under the shower . This
is given with instruction IPX4 .

8.1. Structure

Frame:
Hinge points:
Wheels:
Body support :
Weight:
Maximum permitted load:
Weight comfort leg support:

8.2. Drive

Drive:
Battery:
Charger:
stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
stainless steel, cover caps made of plastic V0
plastic, Ø 12 .5 cm / 4 . 9 inch, double blocking facility
PUR (polyurethane) .
53 kg / 117 lbs
135 kg / 298 lbs
3 .6 kg / 7 . 9 lbs per unit
Actuator 24V
Stainless steel spindles for high / low movement
24 V actuator for tilt adjustments
battery capacity 7Ah
110-240 V AC, 50-60 Hz, max 0,35 A, Cable length 1 .5 m .
Reflex Shower-toilet chair | Instructions for use | 45