Activating; Working With The Reflex - Lopital Reflex Benutzeranleitung

2.2. Activating

Before you can use the Reflex, you must activate it by pressing
both up arrows for 2 seconds (See figure 1) .

2.3. Working with the Reflex

Step 1
Disconnect the Reflex from the charger if necessary .
Step 2
Activate the Reflex (See paragraph 2.2 Activating) .
Step 3
Fold the armrests up or turn the front closure downwards
(See paragraph 3.3 Armrest with front closure) .
Step 4
If necessary, fold the foot plates up or remove the footrests from the Reflex
(See paragraph 3.2 Footrests) .
Step 5
The Reflex must be put on the brakes before transferring persons
(See paragraph 3.1. Wheel blocking) .
Step 6
The client can take a seat in the chair . Support the client if necessary .
Step 7
Place both feet on the footrests and calves against the calf-supports
(See paragraph 3.2 Footrests) .
Step 8
Close the armrests once the client has taken a seat in the chair
(See paragraph 3.3 Armrest with front closure) .
Step 9
Notify the client about the processes you will be carrying out .
Reflex Shower-toilet chair | Instructions for use | 33