Attaching A Saw Blade; Using The Loppers; Setting The Cutting Angle - FLORABEST IAN 305006 Bedienungs- Und Sicherheitshinweise

Attaching a saw blade (see Fig. B)
Q
Note: Keep the protective sleeve on the saw during installing or removing it from
the cutter.
j
Unscrew and remove the thumbscrew and washer.
j
Insert the saw blade.
j
Guide the bolts through the holes in the saw blade.
j
Re-insert the washer and secure the connection with the thumbscrew.
Using the loppers (see Fig. D)
Q
j
Loosen the retaining pin of the loppers.
j
Pull the plastic handle down to make a cut.
j
As soon as you have finished working with the loppers, secure with the
retaining pin.
Setting the cutting angle (see Fig. E)
Q
j
Turn the rotating disc clockwise and choose one of the seven available
angle adjustments.
j
Turn the rotating disc anticlockwise to fix it after the angle has been adjusted.
Note: Please ensure that the turning disc is fixed, before starting work.
GB/IE 15