Steam Function; Automatic Shut Off - BaByliss Steam Pure Bedienungsanleitung

section
thickness
wave 4cm
ripple
loose curl 3 cm
tight curl 2 cm

STEAM FUNCTION

Turn on the appliance and activate the steam function using the steam function
button. The steam function LED indicator lights up.
If the appliance plates are open and not closed for 2 minutes, the steam function is
switched off. Close the appliance plates and the steam function will be reactivated.
If the appliance plates are closed and are not opened for 2 minutes, the steam function
is switched off. Open the appliance plates and the steam function will be reactivated.
Notes:
• The first time you use the appliance, you may notice a slight odour: this is quite
normal and it will disappear the next time you use it.
• Each time you use the appliance, you may see some steam. This can be caused by
sebum evaporation or traces of hair products (rinse-free treatments, hairspray, etc.).
• It is possible to use a heat protection spray for optimal protection of the hair.
• It is quite normal to hear a slight noise, similar to a crackle: this is the characteristic
noise of the ion generator.

AUTOMATIC SHUT OFF

If you leave the appliance on for over 72 minutes, it will automatically shut itself off.
If you would like to continue to use the appliance following this period, press the on/off
button to turn the appliance back on.
turns around the
appliance
half turn - 180°
180°
full turn - 360°
360°
full turn - 360°
360°
9
appliance
position
vertical
horizontal
horizontal
movement
quicker
slower
slow