Maintenance And Cleaning; Cleaning - Sika Ec Rtd Betriebsanleitung

EC RTD
7

Maintenance and cleaning

The monofunction simulator type EC RTD is maintenance-free and cannot be repaired by the
user. In case of a defect, the device must be replaced or returned to the manufacturer for re-
pair.
The only thing that needs to be regularly replaced is the battery.
CAUTION! Material damage!
When opening the device, critical parts or components can be damaged.
 Never open the device and perform any repair yourself.
IMPORTANT! Remove the batteries!
If the device will not be used for longer periods, the battery should be removed from the
device to preclude any leaking damage.

7.1 Cleaning

Clean the EC RTD with a dry or slightly damp lint-free cloth. Do not use sharp objects or ag-
gressive agents for cleaning.
IMPORTANT! Clean the terminals!
Dirt or moisture in the terminals can affect readings:
 Turn the device off and remove all test leads.
 Shake out carefully any dirt that may be in the terminals.
 Soak a new swab with alcohol and clean each terminal with the swab.
Technical changes reserved
Maintenance and cleaning
- 27 -