Hama Cube Bedienungsanleitung Seite 7

Press and hold the +/RCC button (10) for approx. 3 seconds to start a manual search
for the DCF radio signal.
Note – Manual search
• The manual search is automatically aborted after 7 minutes.
• Using the RCC button (10) frequently will drain the battery. We recommend only
using this function to seek out an optimal location for the device.
Note – Summer time
• The clock automatically switches to summer time. DST (6) appears on the display
as long as summer time is activated.
5.2 Manually setting the date/time
• Press and hold the MODE button (9) for approximately 3 seconds until the hours display
begins to ash.
• Set the following information in the order listed:
Time zone (+12/-12), Hours, Minutes, Year, Month, Day, Language
• To select the individual values, press the +/RCC button (10) or the -/°C/°F button (11),
and con rm each selection by pressing the MODE button (9).
• Press the MODE button (9) immediately to adopt the set value displayed and skip ahead.
• If you do not make an entry for 20 seconds, you automatically exit the setting mode.
Note – Day of the week
• For the weekday display (3), you can choose from the following languages:
German (GER), English (ENG), Italian (ITA), Spanish (ESP), Dutch (NET), Danish
(DAN) and French (FRE).
5