Axis 215 PTZ-E Installationshandbuch Seite 14

Page 14
System Application
integration Programming
Interface
Intelligent video
Alarm triggers
Alarm events
Video buffer
General Casing
Processors and
memory
Power
Connectors
Operating
conditions
Approvals
Weight
Optional
accessories
Included
accessories
Heater and fan
The heater and fan in the AXIS 215 PTZ-E are controlled by temperature and will be automatically
activated/deactivated according to the following values:
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Video motion detection
Intelligent video
File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
9 MB pre-and post alarm
IP66-rated, rugged aluminum casing with clear dome bubble
ETRAX FS, ARTPEC-2, 32 MB RAM, 8 MB Flash
100 - 230 V AC: 1.1 A at 110 V AC, 0.6 A at 230 V AC
Pre-installed 5 m (16.4 ft.) power cable without mains plug
RJ-45 for 10BASE-T/100BASE-TX
Pre-installed 5 m (16.4 ft.) Cat-5e cable
-20 to 40 °C (-4 to 104 °F)
2 built-in heaters, 3 built-in fans
EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3,
EN 60950-1, FCC Part 15 Subpart B Class B, ICES-003 Class B,
C-tick AS/NZS 3548
Power supply: UL, CSA, CE
4.8 kg (10.6 lb.) incl. cables, excl. wall bracket and sunshield
6.1 kg (13.4 lb.) incl. cables, wall bracket and sunshield
Corner mount, pole mount, AXIS T8311 Video Surveillance Joystick,
AXIS T90A illuminators
1.5" NPT adaptor, Installation Guide, CD with User's Manual,
recording software, installation and management tools, Windows
decoder 1-user license
Temperature Heater
below 15°C ON
approx. 20°C OFF
over 26°C OFF
AXIS 215 PTZ-E Installation Guide
Fan
ON
OFF
ON