AURES YUNO-151 Bedienungsanleitung Seite 24

3.4 Install the Power Adapter
The system is equipped with a 65W power adapter. Please follow below procedures to
get it plugged into the system.
1. To open the System Cover, please refer to the procedures described in Chapter 3-1,
and remove it.
2. Locate the power connector on the I/O panel (please refer to Chapter 2-5) and
connect the plug of power adapter directly to the DC-IN jack.
Route the DC cord connection securely.
YUNO-151 / 156 / 156-50KH YUNO-151K
19
YUNO-151/156/156-50KH YUNO-151K
DC cord winds
the pillar