AURES YUNO-151 Bedienungsanleitung Seite 22

3.3 Replace the Memory
Make sure the system is powered off before starting.
Please follow the below steps to finish the replacement :
1. Remove the System Cover
To open the System Cover, please refer to the procedures described in Chapter
3-1 and remove it.
2. Locate the memory slot at the left rear side of the system.
3. Flip the ejector clips outwards to remove the memory module from the memory slot.
YUNO-151 / 156 / 156-50KH
YUNO-151 / 156 / 156-50KH
YUNO-151K
YUNO-151K
17