AURES YUNO-151 Bedienungsanleitung Seite 21

6. Connect the power supply to the storage disk drive.
HDD1 labeled on the motherboard provides power supply to the primary storage
disk drive, while HDD2 is for the secondary storage disk drive.
Make sure that all of your connections are secure.
7. Get ready to power on the system.
YUNO-151 / 156 / 156-50KH
Close up the System Cover.
Reconnect the cable plug onto the wall socket and turn your YUNO on.
8. Finish the replacement.
If you are replacing your primary drive, you'll have to reinstall your operating
system.
If you are adding a new drive, you'll need to format the drive before you can use it.
YUNO-151K
16