AURES YUNO-151 Bedienungsanleitung Seite 20

3. Insert your new drive.
Remove it from the antistatic packaging and slide it into your target drive bay of the
storage housing.
4. Secure the storage disk drive.
Once the storage disk drive has been completely inserted, rotate the Releasing
Handler to lock it properly.
5. Connect the storage disk drive to the motherboard.
*If you are connecting your primary storage disk drive, the SATA cable should be
plugged into the first SATA channel, which is labeled as SATA0. Refer to Chapter 6
about the motherboard configuration for detailed information.
Secondary drive should be connected to the next available SATA1 channel.
15