Before Every Treatment - Beurer Tria Precision Reinigungsanleitung

5. Wait 24 hours and then examine the test
areas. If the skin appears normal, start your
first treatment at the highest level you are
comfortable using.
Retest your skin if your skin tone changes
dramatically (due to tanning).
If you notice blistering, burns, changes
in your skin tone or any other side effects, or
if you are not sure about the outcome of the
test, DO NOT USE your Tria Laser Precision.
Contact Customer Service or your doctor.

BEFORE EVERY TREATMENT

PREPARE YOUR SKIN
1. Cleanse the treatment area, removing all
cosmetics, lotions, and creams that may
block the laser light.
2. Shave the treatment area. This removes the
surface hair, which improves comfort and
allows the laser light to better reach the hair
in the follicle.
3.
Dry the treatment area.
UNLOCK THE LASER
The Tria Laser Precision will lock when it's not
in use. A locked device is indicated by the lit
top and bottom indicator lights. To unlock the
Tria Laser Precision, use the skin sensor, which
helps confirm that the Tria Laser is safe for
your skin tone.
1. Unplug the Tria Laser Precision from the
battery charger and press the power button
to turn it on.
2. To unlock, hold the device tip with the
built-in skin sensor against the skin in the
area you wish to treat. The skin sensor will
automatically sense and check your skin. If
the Tria Laser Precision is safe for your skin
tone, the laser will emit a series of beeps
and unlock.
Tria Beauty 12
GB
13