ASROCK K7S41 Handbuch Seite 7

TM
ASRock I/O : 1 PS/2 mouse port, 1 PS/2 keyboard port,
1 VGA port, 1 parallel port: ECP/EPP support,
1 RJ 45 port, 4 default USB 2.0 ports,
1 Game port,
Audio Jack: Line Out / Line In / Microphone In
BIOS: AMI legal BIOS, "Plug and Play" support,
ACPI 1.1 compliance wake up events,
SMBIOS 2.3.1 support,
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 4)
OS: Microsoft
CAUTION!
1. While CPU overheat is detected, the system will automatically shutdown.
Please check if the CPU fan on the motherboard functions properly before
you resume the system. To improve heat dissipation, remember to spray
thermal grease between the CPU and the heatsink when you install the PC
system.
2. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
3. Power Management for USB 2.0 works fine under Microsoft
XP SP1/2000 SP4. It may not work properly under Microsoft
98/ME. Please refer to Microsoft
http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
4. Although this motherboard offers stepless control, it is not recommended
to perform over clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU. The CPU host frequency of this motherboard is determined by the
jumper-setting. You must set the FSB jumper according to your AMD CPU
before you use the "Manual" option as the FSB setting in BIOS setup to
perform over clocking. Please check page 24 of the User Manual in the
Support CD for details.
ASRock K7S41 / K7S41GX Motherboard
® Windows ® 98 SE / ME / 2000 / XP compliant
® official document at
® Windows ®
® Windows ®
7 7 7 7 7