Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Manual KSK-3205
Press and hold the Fn-key together with the M/ -key for 2 seconds. This initiates the
pairing process and a synchronization signal is sent to the USB receiver.
The synchronization process can take up to 10 seconds. The LED (top, left corner)
will be blinking in green during this process. When it turns off, the pairing is complete,
the synchronization process is now complete.
A double click with the left mouse key on the Bluetooth logo opens the menu „Blu-
etooth devices".
•
Click "Add" and „OK".
Errors and omission excepted.
To synchronize, press and hold Fn and M/ .
The status LED light green during the process. After
completion, it turns off.
Alternatively to the just described method, a single click
on the Bluetooth logo opens a pull up menu; and after
a further click on the option „add Bluetooth devices"
appears the menu (shown in the picture).
•
Place a tick for „Device is set and can be identified"
•
and click „Continue>".
14
Werbung
Inhaltsverzeichnis
