Assistance - After-Sales Service - Warranty - PEUGEOT Energysaw-305DB Bedienungsanleitung

4. Remove the worn belt.
5. Put in the new belt, making sure that it is properly centred
on the two driving pulleys.
6. Fasten the headless screw to adjust the belt tension until
the sag at the centre of the belt is approximately 1.3 cm
when the belt is pressed down with the fingers.
7. Once the belt tension is adjusted, tighten the six Philips
head screws (A) Fig.27 once more.
8. Put back the belt cover. Insert and tighten the three Phi-
lips head screws (B) Fig.26 once more.
28
ASSISTANCE – AFTER SALES SERVICE - WARRANTY
All Peugeot machines and accessories are manufactured in accordance with high quality standards and come with after-
sales service provided by a network of approved after-sales service centres. Please contact a PSP Tooling retailer for more
information about our products or for spare parts, after-sales service or details about the guarantee.
PSP Tooling GUARANTEE
PSP Tooling is proud of the quality power tools it sells. The components of our tools are inspected at various stages of pro-
duction and each finished tool is subjected to a final check before being packaged for shipment. Because of our confidence
in our engineering quality, PSP Tooling agrees to repair or replace any part or parts of Peugeot power tools and accessories
which examination proves to be defective in workmanship or material. The warranty period for Peugeot brand is two years.
Any alleged defective part or parts must be returned prepaid to PSP Tooling or one of the service centres. The guarantee does
not include repair labour or parts replacement required because of misuse, abuse, or normal wear and tear. Repairs made by
other than our factory, service centre or authorized service station relieve PSP Tooling of further liability under this guaran-
tee. THIS GUARANTEE IS MADE EXPRESSLY IN PLACE OF ALL OTHER GUARANTEES OR WARRANTIES, EXPRESSED OR IMPLIED,
WITH RESPECT TO QUALITY, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.
65