Safety Rules While Working With Tools - PEUGEOT Energysaw-305DB Bedienungsanleitung

IMPORTANT :
• Please read this instruction manually carefully before starting up the machine.
• This machine complies with the current safety requirements applicable to electrical machines.
• Incorrect use may lead to damage and injury. The machine may not be used by anyone who is not familiar with the
instruction manual. Please keep the instruction manual in a safe place for future use.
1. Keep the working area clean. Injuries are more likely to occur if the working area and bench are cluttered.
2. Keep the environment safe. Do not expose the tools to rain and do not use them in humid or wet environments.
Work in a well lit area. Do not use the tool in the presence of flammable gases or liquids.
3. Keep yourself safe from electric shocks. Avoid coming into contact with surfaces that are connected to the earth.
4. Keep away onlookers and children. Children and onlookers are to remain at a safe distance from the working area.
5. Tools are to be tidied away when not in use. All tools that are not in use must be stored under lock and key in a dry
place, out of the reach of children.
6. Do not force the tool. It will be safer and perform better if allowed to work at the speed for which it was designed.
7. Use a tool with a size and rating that are best suited to the task in hand. Do not force a small tool to do the work of
a heavy-duty tool. For example, do not use a circular saw to cut branches or logs.
8. Wear appropriate clothing. Do not wear loose clothes or jewellery that could be caught in moving parts. Non-skid
shoes are particularly recommended for outdoor work. Wear a protective covering to contain long hair.
9. Always wear safety goggles. A mask should also be used if the operation generates dust.
10. Connect the dust removal equipment. If any dust recovery systems are available, make sure they are connected and
used correctly.
11. Take care of the electrical cord. Never pull the cord to disconnect it from the socket. Keep the cord away from heat,
oil and sharp edges.
12. Secure the workpiece. As far as possible, use clamps or a vice to hold the workpiece. Do not hold the workpiece in
place with your hands.
13. Do not bend over the tool. Keep your balance at all times.
14. Keep the tools in perfect condition. Keep tools sharp and clean for maximum efficiency and safety. Follow the
instructions while lubricating and changing accessories. Regularly check the cord and replace it if damaged. Keep
the handles dry, clean and free of oil and grease.
15. Disconnect the tool when not in use, before maintenance work and before changing accessories such as blades, drill
bits, cutters, etc.
16. Keep away any tightening and adjusting keys. Get into the habit of making sure that tightening and adjusting keys
have been moved away from the tool before starting it up.
17. Avoid unintentional starting up. Make sure that the switch is set to OFF before you connect the tool.
18. Only use extension cords designed for outdoor use. While using the tool outdoors, only use extension cords that
have been designed for outdoor use, marked to that effect.
19. Stay alert. Do not use the tool when tired or under the influence of drugs, alcohol or medication.
20. Inspect all parts for damage. Before continuing to use the tool, inspect any safety guard or other part for damage,
in order to make sure that it is operating satisfactorily and fulfilling its purpose. Check that moving parts are
properly aligned, not jamming and not broken. Also, check the assembly or any other condition that could affect
operation. Any damaged part or guard must be repaired or replaced in an approved after-sales service centre. Do

SAFETY RULES WHILE WORKING WITH TOOLS

46