Home Screen (Temperature Control) - Airzone FLEXA 3.0 IBPRO6 Bedienungsanleitung

Home screen (temperature control)

Press on the Airzone icon once to deactivate the screensaver and go to home. Once
there, you will find the following functions:
Operating mode
Zone
Settings menu
Relative humidity
Sleep Mode
Home screen/Confirm
Operating modes: It displays the operating mode selected from the Master controller
(or from the Think thermostat if configured as Master). These are 5 available modes:
cooling, heating, dry, ventilation and stop (see settings menu on page 16).
Eco-Adapt saving function: It defines the level of energy efficiency set by the
Blueface.
Fan speed: It is an indicator of the fan speed of the AC unit. That speed is set from
settings menu (if it is a fancoil installation) or from the Master controller (see page
17).
Zone/Room temperature: It displays the zone where the thermostat is located.
Its name is defined from the Master Blueface thermostat. It displays the room
temperature of the zone.
Settings menu: The Sleep mode parameters can be always configured. If you have a
Master Think, you can change the mode. In addition, in fancoil installations, you can
also select the speed. (See page 16).
Set-point temperature: It displays the temperature set from the Think control bar
(see temperature control on page 15).
System speed
Eco-Adapt function
Control Bar
Set-point temperature
Time schedule
On/Off
14
EN