Starting The System - PIONEER DJ DDJ-1000 Bedienungsanleitung

Starting the system

Launching rekordbox
Account registration and activation work for rekordbox dj are required at
first startup. For details on each work procedure, access the site below
and see "rekordbox Introduction".
rekordbox.com/manual
For Mac
Open the [Applications] folder in Finder, and double-click the [rekord-
box] icon.
For Windows 10
From the [Start] menu, click [Pioneer] > [rekordbox] icon.
For Windows 8.1
Click the [rekordbox] icon in [Apps view].
For Windows 7
Click the [Start] menu > [All Programs] > [Pioneer] > [rekordbox
X.X.X] > the [rekordbox] icon in order.
Checking audio settings
Check that the [Audio] settings in [Preferences] of rekordbox are set as
follows.
For Mac
[Audio]: [DDJ-1000]
[Output channels]:
[Master Output]: [DDJ-1000: MASTER]
[Headphones Output]: [DDJ-1000: HEADPHONE]
For Windows
[Audio]: [DDJ-1000 ASIO]
[Output channels]:
[Master Output]: [DDJ-1000 ASIO: MASTER]
[Headphones Output]: [DDJ-1000 ASIO:HEADPHONE]
! If PC MASTER OUT is enabled, the "+ Name of audio device in
computer" information will also be displayed after [MASTER] of the
[Master Output] item in the [Audio] settings.
Adding music files to [Collection]
A list of track files managed by rekordbox is displayed on the
[Collection] screen.
Register the track files on the computer as the collection of music for
rekordbox and analyze them to enable those tracks to be used with
rekordbox.
1 Click [Collection] in the tree view.
A list of the tracks registered in [Collection] is displayed.
2 Open Finder or Windows Explorer, and drag and drop
track files or folders containing track files to the track
list.
The track files are added to [Collection], and the waveform analysis
of the track files starts. Wait until the analysis of all the track files is
finished.
12
En
Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
1 Rotary selector
% Turn the rotary selector of deck 1 (left side) to select a
track in [Collection] and then press the rotary selector.
The track is loaded into deck 1.
1