Connecting Output Terminals - PIONEER DJ DDJ-1000 Bedienungsanleitung

Connecting output terminals

Rear panel
Component, amplifier,
powered speaker, etc.
Power amplifier,
powered speakers, etc.
Front panel
1 Be sure to use the [MASTER 1] output terminals for a balanced
output. If they are connected to an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or converter adapter), etc., the
sound quality may be lowered or noise may occur.
For connection with an unbalanced input (such as RCA), use the
[MASTER 2] output terminals.
2 Be careful not to accidentally insert the power cord plug of
another unit into a [MASTER 1] output terminals.
Do not connect terminals capable of supplying phantom power
to the [MASTER 1] output terminals.
3 Be sure to use the [BOOTH] output terminals for a balanced output.
If they are connected to an unbalanced input (such as an RCA or TS
terminal) with an TRS to RCA converter cable (or converter adapter),
TS cable, etc., the sound quality may be lowered or noise may occur.
10
En
R L
Power amplifier
(for booth monitor),
powered speakers, etc.
Headphones