Fitting The Door Handles; Door Reversibility - AEG A72900GNW0 Benutzerinformation

40
Installation
Install the spacers on the back side of the panel.

Fitting the door handles

(Example for right hinge performance)
The handles are supplied as a kit at delivery.
1. Screw the top handle bracket to the
handle rod.
2. Fit the bottom handle bracket on the
lower left-hand side of the door.
3. Fit the top handle bracket on the top
left-hand side of the door.
4. Screw the handle rod to the bottom
handle bracket.
Do not use excessive force and overtighten
the screws (max. 2 Nm) as you may damage
the door handles.
Levelling
When placing the appliance ensure that it stands
level. If necessary adjust the feet using the adjust-
ment spanner supplied.
Door alignment is dependent on proper levelling.

Door reversibility

To change the opening direction of the door, do these steps:
1. Remove the plug from the power.
2. Remove the ventilation grille. Remove the upper filling and install it on the opposite
side of the grille.
Remove the pedal hole cover and install the cover provided in the accessory bag on
the opposite side.
3. Lay down the appliance back side down on a wooden support.
1
3
2
4