Specifications - Synq DFX48 Bedienungsanleitung

ENGLISH
7. DIRECT: used to make the right balance between the original and effect signal.
8. EQUALIZER: a 5band equalizer to further modify the effect signal; Press the FLAT button to switch the
equalizer off.
9. EFFECTS LIST: list with names of the effects currently loaded in the DFX-48.
10. OPEN FILE: used to load previously stored effects from hard disk in the PC-software (and DFX-48) so
you can use them and/or further adapt.
11. SAVE FILE: you can save all effects to a file in one time or just one particular effect. A popup window
appears:
 Only save memory xx: only the effect you selected in the
EFFECTS LIST (9) will be saved to hard disk. You can name
the file whatever you like, the extension ".ef" will be added.
 Save all memory: all 48 user effects will be saved to hard
disk in one file. You can name the file whatever you like, the
extension ".mef" will be added.
12. LOAD: loads all user effects from the DFX-48 to the PC-
software. However normally the DFX-48 and the PC-software are always synchronized.
13. ENTER: used to store the effect you just made/modified to the DFX-48 so it can be used when the PC is
not connected anymore:
 In the EFFECTS LIST (9) first select the location where you want the new effect to be stored (one of
the 48 available locations)
 Press the ENTER button, a popup window opens.
 Insert whatever name you like (maximum 12 characters !)
 Press the OK button: the effect is stored into the DFX-48 at the location you selected.
14. EFFECT PARAMETER: all effect parameters are listed, you can select one of the parameters and adapt
it very easily with the slider on the bottom of the list. You will hear the effect immediately!
15. BYPASS: simply press the green button to switch the effect on/off.

SPECIFICATIONS

Power Supply:
Fuse:
Frequency response:
THD + noise:
S/N Ratio (IHF-A):
Input level:
Input Impedance:
Output Impedance:
AD/DA:
Sample rate:
SINGLE EFFECT PRESETS:
MULTI EFFECT PRESETS:
Dimensions:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
SYNQ
®
Every information is subject to change without prior notice
90Vac ~ 240Vac, 50Hz
20mm glass fuse 250V 1A slow
20-20.000Hz (+/-0,25dB)
<0.03% @ 1kHz, 0dB
>95dB @ 1kHz.
-20dB/+4dB
40kΩ balanced
20kΩ unbalanced
66Ω balanced
33Ω unbalanced
24bit Sigma/Delta
48kHz
number = 36
cathedral, short room 1+2+3, room 1+2, small hall 1+2, large
hall 1+2, short plate, vocal plate, church 1+2, delay 1+2,
triplet delay, multitap delay, gated reverb 1+2, gated plate
1+2, stereo echo, triplet echo, chorus light 1+2, chorus
medium 1+2, chorus fast 1+2, resonant chorus, long time
chorus, leslie slow, pitch.
number = 12
Delay&reverb 1+2, chorus&reverb 1+2, flanger&reverb 1+2,
chorus&delay 1+2,
distortion&gate, pitch&delay.
482(W) x 44(H) x 152(D) mm
2,00kg
7/46
OPERATION MANUAL
distortion&chorus, distortion&delay,
DFX-48