Synq DFX48 Bedienungsanleitung Seite 5

ENGLISH
CONNECTIONS
Connections can be made with balanced/unbalanced jack or XLR-cables. Please only use good quality
cables to minimize noise and interference. The DFX-48 can be connected in two ways:
- Between a line level audio source and the input of your mixer.
- To the channel effect sends or AUX of a PA-mixer (effect send switched in post fader mode)
VIA PA-MIXER EFFECT SEND / AUX
(set the direct signal level to 0%)
Connector wiring:
FUNCTIONS (FRONT)
1. SIGNAL METER: indicates the level of the input signal, please check n°14 to see how you can adapt the
input sensitivity.
SYNQ
®
BETWEEN AUDIO SOURCE AND MIXER INPUT
(set the direct signal level to your own taste)
3/46
OPERATION MANUAL
DFX-48