Checking The Software Version; Using The Software - Synq DFX48 Bedienungsanleitung

ENGLISH
 Part3 – first time use
 First connect the DFX-48 with your PC via USB.
 The USB output of the PC will be treated by the software as an RS-232 connection. Therefore you will
have to set the correct RS232 port when you use the software for the first time:
 Start the PC software. In the left upper corner you will notice the icon on the right, indicating
that the software is not connected to the processor.
 Open the "FILE" menu and select the "RS-232" option.
 Normally you should choose "COM3". To be sure you can check the COM-port in the Windows
manager.
 Open the "FILE" menu again and select "CONNECT" or simply click the icon on the main screen.
If the software can connect to the processor than you should see the sign on the right. If this
doesn't work, you should also select some other COM-settings and try again to establish a
connection.

CHECKING THE SOFTWARE VERSION

Open the "HELP" menu and select the "About" option. In the popup window you can see the software
version and program build:

USING THE SOFTWARE:

Keep in mind that the software is always connected to the processor so all parameters and settings you
change in the software are immediately sent to the DFX-48! This means that you have "live" interaction with
the effects of your audio system. On the screen you can see that the PC software has a very easy interface
with clickable icons.
1. CONNECT ICON: click this icon to connect / disconnect from the DFX-48. A red cross is shown when
the processor is disconnected. Note: the DFX-48 must be connected while using the PC-software!
2. PRESET: here you can choose of the 48 standard effects. With the other buttons/sliders you can adapt
the effect and save it with a new name to the processor and/or the hard disk of your PC.
3. REVERB/ECHO/GATE: choose one of the 27 parameters and further adapt them if you like.
4. CHORUS/FLANGE/DELAY: choose one of the 27 parameters and further adapt them if you like.
5. PITCH: choose one of the 25 parameters and further adapt them if you like.
6. DISTORTION: choose one of the 14 distortions and further adapt them if you like.
SYNQ
®
6/46
OPERATION MANUAL
DFX-48
®
device