Modster R1 Bedienungsanleitung Seite 19

Manual
4. Setup
4.1 Assembly
1. Make sure that all components of the set content are included. Then
place the scooter on the floor when it is folded in and the kickstand is
unfolded. Attach the steering handles to the upper horizontal tube of
the handlebar.
3. Place the handlebar covers over the two rods.
4.2 Unfold
Step 1: Unlock the locking clasp by pressing the fender down and turning it sideways.
Step 2: The folding mechanism is equipped with a
safety system that protects the scooter from unin-
tentional collapse once it has been correctly ope-
ned. There is a safety extension at the lower end of
the handlebar (see point 4.2), which protects the
folding lever.
Unfold:
Lift the handlebar upwards, turn it at a certain ang-
le, so that the folding lever is covered by the safety
extension (see illustration). The handlebar is now
locked correctly.
www.modster.at
2. Fix the two rods by aligning them with the mounting holes and at-
taching screws.
MODSTER R1
19