Tascam DR-44WL Bedienungsanleitung Seite 2

Adding marks manually during playback
Press the ENTER/MARK button during playback to add a mark at that position.
The number of the added mark will be shown on a pull-up at the bottom of
the display.
Clearing specified marks
Pause at the position of a mark. Then, press the ENTER/MARK button to clear
that mark.
Adding marks automatically when the PEAK
indicator lights
The unit can add marks automatically when the PEAK indicator lights during
recording.
Press the MENU button to open the
1.
Use the wheel to select
2. AUTO FUNCTION
MARK or / button.
The
AUTO FUNCTION
Use the wheel to select the
3.
PEAK MARK
and press the ENTER/MARK or / button.
Use the wheel to turn the
4.
PEAK MARK
Options: (default),
OFF ON
Press the ENTER/MARK button to confirm the setting and reenable
5.
setting item selection.
When finished making the setting, press the 8/HOME button to return
6.
to the Home Screen.
NOTE
•
Marks are added two seconds before a PEAK indicator lights.
•
For 10 seconds after a mark is added because a PEAK indicator lit,
no other mark will be added if the PEAK indicator lights again or an
automatic mark would normally be added according to the
setting.
•
Marks added because of a PEAK indicator lighting will not cause
division when the automatic division function is used.
2
TASCAM DR-44WL
Screen.
MENU
, and press the ENTER/
screen opens.
item under
AUTO MARK
function .
ON
LEVEL
Setting the mark skip mode
Multiple types of marks can be added to files (
and ). With this function, you can set what type of mark to use when
PEAK
moving between them.
Press the MENU button to open the
1.
Use the wheel to select
2.
button.
The screen opens.
SYSTEM
Use the wheel to select
3.
MARK or / button.
Use the wheel to set the mark skip mode.
4.
Options
(default): Move between all marks
ALL
: Move between marks added manually
MANUAL
: Move between marks added using the automatic mark
LEVEL
function
LEVEL
: Move between marks added using the automatic mark
TIME
function setting
TIME
: Move between marks added when a PEAK indicator lit
PEAK
: Do not move between marks
OFF
Press the ENTER/MARK button to confirm the setting and reenable
5.
setting item selection.
When finished making the setting, press the 8/HOME button to return
6.
to the Home Screen.
,
DR-44WL
,
MANUAL LEVEL
Screen.
MENU
, and press the ENTER/MARK or /
SYSTEM
, and press the ENTER/
MARK SKIP MODE
setting
,
TIME