HQ Power VDPDMXC146 Bedienungsanleitung Seite 2

• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device will be protected against extreme heat, moisture and dust.
• Do not use or transport the device under temperatures < 5°C or > 35°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit
operation by unqualified people. Any damage that may occur will probably be due to
unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty.
Only use the device for its intended purpose. All other uses may cause short circuits, burns,
electroshocks, lamp explosions, crashes, etc. Using the device in an unauthorised way will
void the warranty.
4. Description
a) Front Panel
1. LED indicators for PRESET A dimming controls
The LED lights when the slide control is moved upwards.
2. Channel sliders (1 – 12)
Adjust the output of each channel between 0 – 100% or 0 - 255.
3. Flash Keys (1 – 12)
Press a flash key to make a channel jump to 100% output.
4. LED indicators for preset B dimming controls
The LED lights when the slide control is moved upwards.
VDPDMXC146
Fig. 1
2 VELLEMAN