Bimar Cashmere HF200 Bedienungsanleitung Seite 19

their current capacity (amperes) must not be less that the maximum
of the heater.
• Before each use, verify that the heater is in good condition and that
the electrical cord is not damaged: in the case of doubt, ask for
professionally qualified help.
• Make sure that the cable is correctly positioned and that it is not in
contact with hot parts or sharp edges, nor wrapped around the device
or twisted.
• Position the fan heater far from other sources of heat, inflammable
materials (curtains, carpets, etc.), inflammable gases or explosive
materials (spray cans) and from materials that can deform on exposure
to heat. Make sure that there is 120 cm of free space in front of the
fan heater and 50 cm on the sides.
• Do not hang or simply pull the unit to the wall or walls.
• Make sure that the fan heater is working correctly: if not, turn the
heater off and have it checked by professionally qualified personnel.
• Make sure that the air-intake grid is not obstructed by objects, fabrics
or anything else to avoid the heater overheating or breaking.
USE
Before each use, verify that the unit is in good condition, the electric
cord is not damaged, if the power cord is damaged, it must be replaced
by the manufacturer or a competent qualified electrician or a person
with similar qualifications, in order to avoid any risk.
type HF200 basic version (Fig.1)
The fan-heater is fitted with switch, thermostat, light and anti-tipping
switch, with safety device:
- the switch sets following functions:
"0"= OFF; " "= fan; "
(2000W)
- the thermostat sets the room temperature, that will be higher if the
knob is rotated to position max clockwise: when the temperature is
reached, it will be kept uniform
- the light turns on and turns off when the appliance reaches the
requested temperature
- The base has an anti-tipping switch which allows the heating fan to
function only when it is positioned correctly (when it is put in place,
you will hear a "click") but it stops the appliance if it tips.
- safety device will stop the fan heater from running. To restore
operation, remove the plug from the mains and wait for it to cool
"= air warm (1000W); "
19
"= air very hot