28
www.electrolux.com
Problem
The water comes out of
the cavity embossment.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
12. INSTALLATION
WARNING!
Refer to Safety chapters.
12.1 Building In
Possible cause
There is too much water in
the cavity embossment.
80
60
520
33
100
200
200
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
min. 550
560
18
20
600
min. 560
5
3
Remedy
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
546
21
114
4
589
594
471
+-1
595
min. 1200