Herunterladen Diese Seite drucken

NINCO HEAVYDUTY NT10002 Handbuch Seite 9

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
BEFORE PLAYING:
Insert the batteries into the transmitter and press the power button. Place the battery in the tank and turn the switch ON. Leave the vehicle
horizontally on a suitable surface.
ON / OFF BUTTON:
Pressing the button you hear the sound when starting an engine. While running, the tank emits the sound of an engine. After the game, press this
button again and the tank will be stopped.
TURRET ROTATION:
The barrel can be directed to the right and left side from the transmitter with the rotation of the turret.
FIRE BUTTON:
Pressing the button you hear the sound of a shot. If you do the shooting while turning the turret, it triggers a burst.
MOVEMENTS:
The left stick of the transmitter does the turn to the left, the right stick does to the right. The two forward while moving the tank do move forward and the two
back simultaneously move it backwards. You hear the sound of the vehicle running.
SPECIAL FEATURES
MUTE:
Pressing the fire button and then press the ON / OFF simultaneously, enable / disable the speakers.
DEMONSTRATION:
After starting the vehicle, if you don't do anything with the transmitter, starts a demo mode that shows all of movements of the tank. When a button is
pressed the controller is activated. The tank is again under user control.
AUTO POWER OFF:
If the batteries are not charged sufficiently or the signal between transmitter and vehicle is deficient, the tank stops automatically.
BATTLE TANKS:
Two tanks with different infrared control frequencies can reproduce realistic battles between them.
Each tank has 4 LED indicators of vital energy. When thank receives a shot impact (from static turret) or five bursts impacts (from moving turret) a LED turn off. When all
LEDs are off, the tank has lost the battle.
When a tank is hit, the left end LED flashes (LED4). Until it get fixed again, the tank can not shoot.
When the LED1 and LED2 turn off, the tank is disabled and can not use burst shooting.
When the LED1, LED2 and LED3 turn off, the tank is disabled and can not use burst shooting or the rotation of the turret.
When all LEDs are off, the tank has lost the battle. The LEDs flash for 30 seconds and the tank remains stationary. Then restart and begin again.
HAND BOOK
ENGLISH

Werbung

loading

Verwandte Produkte für NINCO HEAVYDUTY NT10002