Device Status - Orbis CODITEL 2 Bedienungsanleitung

The status of the device is segnalated by the led
OFF  system not fed
BLINKING RED  SIM not inserted or pin code in activity
FIXED RED  GSM field insufficient
FIXED GREEN  starting system/network research
BLINKING GREEN  connected to GSM network
QUICKLY BLINKING GREEN  arriving in command (ring or SMS)
QUICKLY BLINKING RED/GREEN  programming mode active
BLINKING YELLOW  connected to GSM field but low level battery
QUICKLY BLINKING RED  modem error or failure (if still flashing)
Note: blinking = 1 lamp / second
quickly blinking = 5 lamps / second
➢ Getting a SIM card enabled for phone traffic, with the required pin code and the
answering machine disabled (to disable the pin code, to use a mobile phone and
follow the steps described in the relative user's guide).
➢ Remove the flip cover of the housing using a screwdriver.
➢ Insert the SIM card into the slot (push-push type). The direction of insertion provides
that the bevel of the SIM card goes inside in the left.
Note: ensure that the power cables are disconnected before inserting/remove
the SIM card.

DEVICE STATUS

:
INSTALLATION
- 34 -
User Manual CODITEL 2