Transporting, Storing The Device; Troubleshooting - WalimeXPro RingFlash HS 400 Gebrauchsanleitung

8. Transporting, storing the device

WARNING
Danger of fire caused by hot parts of the equipment. Allow the device to
cool down completely.
• Switch off the device (See „Switching the device on, off)
• Allow the device to cool down completely
• Unplug the power supply cable from the device
• If necessary clean the device (See „Cleaning the device")
• Lay the device and all disassembled elements into the original article
packaging box and transport of store as specified in the technical specifi-
cations. See technical specifications.

9. Troubleshooting

Problem
The device
is switched
on, but does
not show any
function.
The illuminant
does not light
38
Possible cause
The powerpack is not
or only insufficiently
charged/defect.
LC Display shows
The illuminant is
defective
The illuminant is
switched off
Remedy
Charge the powerpack/
replace the powerpack.
Overheating protection active.
Allow the device to cool down
for approx. 10 min.
Replace the illuminant, must
only be carried out by a
skilled electrician
Switch on the illuminant