Herunterladen Inhalt Inhalt Diese Seite drucken

Ma Chine´s Safety Equipment; General; Start Button; Emergency Stop And Stop Button - Husqvarna PP 440 HF Bedienungsanweisung

Für wandsägen
Vorschau ausblenden Andere Handbücher für PP 440 HF:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

General

W ARNING! Never use a machine with faulty
!
safety equipment. The machine's safety
equipment must be checked and maintained
as described in this section. If your machine
fails any of these checks contact your
service agent to get it repaired.
This section descr ibes the machine´s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly.
Star t button
The b utton is used to activate the remote control.
ON/OFF
Chec king the start button
Activate the remote control by pressing the "ON/OFF"
button. Allow the remote control to fully charge and await
the home screen.
Turn off the remote control by pressing the "ON/OFF"
button.
Emer gency stop and stop button
The po wer pack is equipped with an emergency stop and the
remote control with a stop button. These are used to be able
to quickly shut down the power pack.
6 –
English
MA CHINE´S SAFETY EQ UIPMENT
OK
0
Chec king the emergency stop and stop
button
Start the blade rotation.
Push the emergency stop on the power pack and check
that the blade rotation stops. Check the stop button on the
remote control in the same way.
Main s witch
The main s witch is used to switch the electricity supply to the
power pack on and off. The main switch must be in the "0"-
position when the incoming cable is connected.
Chec king the main power switch
Turn the main switch to the "0"-position.
Try to start the saw.
The saw must not start.
Residual-current de vice (Only on 5-
pin machines)
The single phase soc ket on the power unit is fitted with a
ground fault circuit interrupter. Ground fault circuit interrupters
are for protection in case an electrical fault should occur.
Chec k the residual-current device
Turn the main switch to "1"-position.
Press the yellow test button. The ground fault circuit
interrupter must trigger and the automatic fuse must
switch off.
Reset the ground fault circuit interrupter by folding up the
automatic fuse.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pp 480 hf

Inhaltsverzeichnis