Basic Working Techniques; Transport And Storage - Husqvarna PP 440 HF Bedienungsanweisung

Basic working techniques

The following can be operated using the control levers on the
remote control:
• Travel feed
ON/OFF
• Arm feeding
ON/OFF
• Blade/wire rotation Start the rotation of the blade/wire by
holding the "back" button in while turning the rotation
control clockwise. The rotation speed is controlled with a
potentiometer.
ON/OFF
• Read through the manual supplied with the wall saw for
further instructions in sawing technique.
OPERATING
OK
0
OK
0
OK
0

Transport and storage

• Always switch of the power pack and pull out the electric
cable before moving the equipment.
• Use the cases provided to store the equipment.
• Secure the equipment during transportation in order to
avoid transport damage and accidents.
• Store the equipment in a lockable area so that it is out of
reach of children and unauthorized persons.
• Store the machine and its equipment in a dry and frost
proof place.
• Do not expose the machine to temperatures exceeding
45°C or to direct sunlight.
– 11
English