Maintenance; General; Daily Maintenance; Service - Husqvarna PP 440 HF Bedienungsanweisung

General

WARNING! The user must only carry out the
!
maintenance and service work described in
this Operator's Manual. More extensive work
must be carried out by an authorized service
workshop.
The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not carried
out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact
your nearest service workshop.

Daily maintenance

• Check that the machine's safety equipment is
undamaged. See instructions in the section "Machine's
safety equipment".
• Always clean all the equipment at the end of the working
day. Use a heavy-duty hand-held brush or a large paint
brush.
• Make sure to keep the connectors and pins clean. Clean
with a rag or brush.
NOTICE! Do not use a high pressure washer to clean the
machine. The high pressure jet can damage seals and lead
to water and dirt permeating into the machine, resulting in
serious damage.

Service

WARNING! All types of repairs may only be
!
carried out by authorised repairmen. This is
so that the operators are not exposed to
great risks.
After 100 hours of operation, the message "Time for
servicing" is displayed. The entire equipment shall then be
taken to an authorized Husqvarna dealer for servicing. The
message reappears 100 hours after each service.
16 –
English

MAINTENANCE