Installation Steps; Package Contents; Optional Accessories - Axis Q1614 Bedienungsanleitung

AXIS Q1614 Network Camera
Installation Guide
This Installation Guide provides instructions for installing AXIS Q1614 Network Camera on your
network. For other aspects of using the product, see the User Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 14.
4. Install the hardware. See page 18.
5. Access the product. See page 18.
6. Set the focus. See page 18.

Package Contents

• AXIS Q1614 Network Camera
• 2–pin connector block for power input
• 4–pin I/O connector block for connecting external devices
• Camera stand
• Torx screwdriver T20
• Installation and Management Software CD
• Printed materials
-
-
-

Optional Accessories

For information about available accessories, including power accessories and outdoor housings see
www.axis.com
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
9