Freestanding Installation - Klarstein 10032867 Bedienungsanleitung

EN
14

FREESTANDING INSTALLATION

The heater must always be used with the feet assembled and in upright position Attach
the feet to the heater in the orde r given in Figure below.
• Make sure the heater is switched off and unplugged
• Turn the heater upside down(Switch cont rols nearer to floor)
• Locate the feet in position, making sure the holes in the feet align with the fixing
holes on the heater body.
• Secure the feet using the screws provided.
Screws
2 Heizseinstellungen
600 W, 900 W, 1500 W
beleuchtete Tasten