Hozelock AC Pro 2701 Bedienungsanleitung Seite 5

i. Press when MANUAL ON is displayed. Watering will
start and continue for the displayed time. This can be changed
using the and buttons. (Displayed in minutes, up to 59)
ii. Press the button (MANUAL OFF) at any time to stop
watering.
PROGRAMMING THE TIMER
There are four ways to set the timer:
1. ULTRA EASY - ONE TOUCH PROGRAMMING
The quickest way to get the Water computer to start automatic
watering is:
i. Press and hold the button on the Main menu until the
screen displays: 5 MINUTES WATERING EVERY 24 HOURS. START
NOW?
ii. Press the button and the water computer will
immediately start watering for 5 minutes and will repeat this
every day at the same time. Or press
menu.
Press when MENU is displayed, and use
the Main Menu which includes 3 other ways of
programming the timer. Press
following:
2. VERY EASY - WATERING PRE-SETS
There are 13 preset programs built in to the computer that will
cover most people's requirements. Use the
select the most appropriate program and press
3. EASY - WATERING WIZARD
The watering wizard allows easy selection of watering start
time, watering duration, watering frequency and the watering
days.
to return to Main
to access
to enter each of the
arrows to
to select.
i. Select 1 of 4 program types and press
ii. Use and to enter watering start time and watering
duration.
iii. For pick day program types, use
to the watering day question.
iv. A summary of the watering program will be displayed. Press
if you are happy with the settings. If not,
to make changes.
4. EXPERT - WATERING MANAGER
The Watering Manager allows editing of any existing program
(created either by 1 touch, Preset, or Wizard), and lets you
create new watering programs.
Choose the day you wish to edit using the
press .
Select from:
EDIT /VIEW – gives you complete control over all programs.
i. Use the buttons to change the start time, watering
duration and the program status (ON or OFF).
ii. Press to scroll through all 4 programs.
iii. A summary of the watering program will be displayed. Press
if you are happy with the settings. If not,
back to make changes.
COPY TO ALL DAYS – copies the selected day's program settings
to all other days. This overrides any existing programs.
CANCEL DAY – deletes the selected day's programs.
Press to confirm all changes.
WATERING MODE
This is a quick way of adjusting watering duration without
having to alter the programs settings. If, for example, weather
conditions require a longer or shorter watering duration then
2
.
to answer Yes or No
takes you back
buttons, then
takes you