Setting Time - miniland baby humiplus advanced Gebrauchsanweisung

ENGLISH
5.4. AUTO HUMIDISTAT
Press Auto Humidistat button (C, or on the remote control II) to activate the
AUTO
automatic humidity function.
The ideal humidity of 55% is maintained. When the humidity level in the room is
less than the auto humidity level (55%), the humidifier will continue producing
moisture automatically. Once the humidity level of room level is reached, the
humidifier will turn itself off.

5.5. SETTING TIME

This humidifier has 12 hours timer setting, from 1 hour up to 12 hours. To use
this feature, simply press the Timer button (D, or on the remote control V).
The timer setting signal is displayed on the screen. After setting 12 hours, press
the timer button, it will turn off the timer setting function.
5.6. SETTING THE RELATIVE HUMIDITY %
Gently press the Set Humidity button (E, or on the remote control III), it will
enter the Relative Humidity setting control. Press the Set Humidity button to set
the desired relative humidity % (RH) and increase RH%. We recommend a
relative humidity of between 40% and 60%. The appliance can be regulated
from 40% to 75%, or Continuous operation (Co).
With all settings, the RH% signal is displayed on the screen. By pressing the
button for one second, you can continuously increase or decrease the RH%.
If you don't press the button for more than 4 seconds, the actual RH% will be
shown on the screen panel again. When the actual RH% is greater than the
desired setting RH% over 3%, the humidifiers will be automatically stopped.
The appliance will not turn itself off if it has been set for Continuous operation
(Co). The desired value is shown while you are making the selection. After a
few seconds, the display automatically switches to the current value.
5.7. MIST EMISSION SETTING
Press the Mist emission button (F, or on the remote control VI) it will enter
the Spray level setting control. Press the Mist emission button to increase the
spray level.
The spray level is low, medium and high. We recommend a low mist emission
setting for night use.
If you don't press the button for more than 4 seconds, the actual RH% will be
shown on the screen panel again.
5.8. WATER EMPTY SIGNAL
When the water tank is empty, there will be a water empty sign shown on the
display (K). The humidifier will automatically turn itself off. Users need to
refill with water when the flash warning signal is shown.