Test Function Menu; I/O Status Menu - Videotec MAXIMUS MVXT Bedienungsanleitung

6.1.6.2 Test function menu

A diagnostic menu is available to conduct operational
tests on the device.
It allows you to configure the following parameters:
Enable the Relay: Allows users to enable the
3.
relay.
4. Device reboot: Allows users to reboot the
device.
5. I/O status: Allows access to the l/O status menu.
TEST FUNCTIONS
------------------------
3>RELAY ON
4 DEVICE REBOOT
5 I/O STATUS
Fig. 42
24

6.1.6.2.1 I/O status menu

This menu displays the status of certain device
components (useful for diagnostic functions).
Input alarm: Displays the alarm status (enabled or
disabled).
Dip In: Displays the status of the control board dip-
switch.
Relay: Displays the relay status (enabled or disabled).
Wiper: Displays the wiper status (enabled or
disabled).
Camera Power Supply: Displays the camera status
(enabled or disabled).
: Y I/O STATUS
------------------------
: Y
ENTRY ALARM
>
DIP IN
RELAY
WIPER
CAMERA POWER
Fig. 43
: 0
: 0
: 0
: 0
: 1
MNVCMVXTCAM_1630_EN