Taking Out Of Service - Relyon plasma piezobrush PZ2 Betriebsanleitung

Attention - Damage to device!!
The plasma generator may be damaged, if used without gas flow resulting in a lack of the
cooling medium needed in the process. Ensure that the fan grille and the nozzle outlet are
not covered while in use.
The plasma generator may be damaged if electrically conductive objects are closer than
60 mm (~2.4 inches) to the front third of the plasma generator.
Exception: Substrates in front of the nozzle when using the nearfield-nozzle.
X

Note!
The plasma generator with standard nozzle is not fit for the use on metal or electrically
conductive substrates.
Such substrates may result i n negative affect on the process and damage to the
device.
The treating of electrically conductive substrate is only allowed with a specially designed
nozzle (e.g. the nearfield nozzle).
Do not use the plasma generator on sensitive electrical components for it may damage
these components.
8

Taking out of service

• Press the On / Off button again.
• Disconnect the power supply once work is complete.
14
X

BA-PZ2_ML / F0351301